Menu
Your Cart

Communications

Sensitivity <= -90dBmWorking Frequency: ISM 5.8 GHzAvailable Channels: 48Power Supply: 12V DCConsumption current: 200 mA maxAntenna Input Impedance: 50 ohm Typ.Antenna Connector: SMAAntenna Gain: 2 dBiVideo Output Level: 1.0 Vp-p Typ 75 ohmVideo Output Level: 1.0 Vp-p Typ 10k ohmAudio Carrier: 6...
$20.00
Features32 channels: Cover A, B, E bands and F bandsTwo switching buttons for the band and channelTwo digits display for  the band and channelPower off memory for last channel and bandDual Independent video and audio signal outputsTX TS832 specs:Power input: 7.4-16V (3S Lipo / ~12v suggested)Ou..
$25.00
The HC-06 Bluetooth Module allows for wireless serial bluetooth communication with bluetooth devices. This small, compact module is perfect for remotely controlled projects or data logging.The HC-06 can only be used as a Slave device.  This means the HC-05 can initiate a connecti..
$13.00
The ESP-01 wifi module allows microcontrollers to connect to a wifi network for IoT based applications. The ESP-01 uses the ESP8266 wifi microchip. It can be flashed using an Arduino or USB to TTL UART converter using the Arduino IDE.Features:Powered by: 3.3V to 3.3V pin4 Di..
$8.00
Module: ESP-07Device: ESP8266MODFrequency: (ISM): 2.4GHzPower: +25dBmSupported Wifi: 802.11 b/g/nOperating voltage: 3.3VMin Current (Sleep): 10mAMax current (connected to 802.11b network): 215mA..
$4.50
The NodeMCU V3 ESP8266 wifi module is an open-source firmware and development board for IoT based applications. It is based on the ESP-12E (an ESP8266 microchip based wifi module) and utilises the CH340 USB-TTL serial chip. This wifi module can help prototype IoT produc..
$13.00
The ESP-14 wifi module is basically an ESP-01 combined with a STM8S003F3P6 MCU that is perfect for IoT based applications. The ESP-14 uses the ESP8266 wifi microchip. This wifi module can help prototype IoT products and is programmable with the Arduino IDE as an STM8S MCU.Feature..
$9.00
Ir Infrared Obstacle Avoidance Sensor Proximity Line Following..
$3.50
nRF24L01+ PA/LNA 2.4GHz radio transceiver module with antenna allows for easy and low-cost wireless communication. Compatible with Arduino microcontrollers using SPI and useful in projects such as game controllers, wireless peripherals and RC vehicles.Features:Worldwide 2.4GHz ISM ban..
$12.00
The SD Module can greatly expand the Arduino's limited memory, with various applications such as data logging, audio, video or graphics. Easily interfaced as a peripheral using the SPI protocol.Mounting hole diameter: 2mmCompatible with full-size SD cardsPinout:5V: Supply voltage of 5V3V3:..
$3.00
Short Range RF
Out Of Stock
nRF24L01+ 2.4GHz radio transceiver module allows for easy and low-cost short ranged wireless communication. Compatible with Arduino microcontrollers using SPI and useful in projects such as game controllers, wireless peripherals and RC vehicles.Features:Worldwide 2.4GHz ISM band opera..
$4.00
Showing 1 to 12 of 13 (2 Pages)